|
|
|
Application | Features | Specifications |
The
PY series Cone Crusher has been developed to crushe high or medium
hardness material ,such as iron ore ,copper ore, limestone, quartz,
granite, and sand stones, ect., in metallurgical, construction,
road building, chemical, silicate Industries. This crusher has the
advantage of reliable construction, high prod activity , easy adjustment
and less cost in operation. The spring release system of crusher
acts an overload protection system that allows tramp to pass through
the crushing chamber without damage to the crusher, use dry oil,
water, two kinds of sealed formation. It made plaster stone and
engine oil separated, assured reliable performance. The type of
crushing chamber depend upon the size of feed and fineness of the
crushed product. The standard type is applied to medium crushing,
the medium type is applied to medium or fine crushing and the short
head is applied to fine crushing.
|
 |
The PY series crushers crushes
by the change of the gap in the crushing cavity .The gap is opened
and closed by the gyration of main shaft, which is derived by motor
through cone gears. The PY series cone crusher is of high reduction
ratio, high performance, low power consumption, and uniform size
products. It has been used in the secondary and tertiary crushing.
The crushing action is caused by the closing of the gap between
the mantle line (movable) mounted on the central vertical spindle
and the concave liners (fixed) mounted on the main frame of the
crusher.
The gap is opened and closed by the gyration of main shaft, which
is driven by the eccentric sleeve.
The eccentric sleeve is driven by the motor through elastic coupling
, transmission shaft and cone gears .
The cone crusher consists of body frame, transmission shaft, eccentric
sleeve, cone bearing, breaking cone, supporting sleeve, adjusting
sleeve, feeding part，spring，elastic coupling ，lubrication part ,
electric part, ect.. |
 |
| Type |
Outside diameter
Of crushing cone(mm) |
Max feed size
(mm) |
The adjusting range
of discharger
(mm) |
Crushing capacity
(t/h) |
Electric motor power
(kw) |
Speed of Eccentric shaft
(r/min) |
weight
(T) |
Overall dimensions
(LхWхH)(mm) |
PYB |
600 |
600 |
65 |
15-25 |
40 |
30 |
356 |
5 |
2234х1370х1675 |
PYD |
35 |
3-13 |
12-23 |
5.5 |
2234х1370х1675 |
PYB |
900 |
900 |
115 |
15-30 |
50-90 |
55 |
333 |
11.2 |
2692х1640х2350 |
PYZ |
60 |
5-20 |
30-65 |
11.2 |
2692х1640х2350 |
PYD |
50 |
3-13 |
15-50 |
11.3 |
2692х1640х2350 |
PYB |
1200 |
1200 |
145 |
20-50 |
110-168 |
110 |
300 |
24.7 |
2790х1878х2844 |
PYZ |
100 |
8-25 |
42-135 |
25 |
2790х1878х2844 |
PYD |
50 |
3-15 |
18-105 |
25.3 |
2790х1878х2844 |
PYB |
1750 |
1750 |
215 |
25-50 |
280-480 |
160 |
245 |
50.3 |
3910х2894х3809 |
PYZ |
185 |
10-30 |
115-320 |
50.3 |
3910х2894х3809 |
PYD |
85 |
5-13 |
75-230 |
50.2 |
3910х2894х3809 |
PYB |
2200 |
2200 |
300 |
30-60 |
59-1000 |
280-260 |
220 |
80 |
4622х3302х4470 |
PYZ |
230 |
10-30 |
200-580 |
80 |
4622х3302х4470 |
PYD |
100 |
5-15 |
120-340 |
81.4 |
4622х3302х4470 |
|
