|
|
| The national IPR product─Straight
Centrifugal Flour Mill is our latest type which is designed by our
experts who have long experience and hard research in mill equipment,
which has opened a new time of industrial flour mill with high efficiency
and low energy consumption. |
| The machine is used to grind
various non-inflammable and non-explosive stuff in mining, building,
chemical, metallurgical industry, etc. It can grind high, medial and
low hardness material whose Moth’s hardness is below 9.5,such as silica
carbide, zirconium, quartz stone, granite, barite, marble, limestone,
soap stone, calcium sulphate stone, slag, ceramic prismatic, glass,
etc. |
| Type |
Feed
size(mm) |
Product
size(mm) |
Capacity(t/h) |
Power
of Main motor(Kw) |
Power
of Blower(Kw) |
Dimension(mm) |
Weight(t) |
| MGZ806 |
＜20 |
＜0.2～3 |
7～11 |
37 |
2.2 |
2600×2100×2400 |
4.7 |
| MGZ1008 |
＜25 |
＜0.2～3 |
10～16 |
55 |
4 |
3200×1900×2700 |
7 |
Note: (1)The product size can be adjusted.
(2)The
capability is based on the product without screened, and 95% below
3 mm.
(3)Subject
to change without notice. |
| The motor drives the
rollers suspension frame through flywheel and shaft,and the rollers
will rotate around the ring with the rollers suspension frame. Deduster
will eliminate the dus,meanwhile carry away the heat. |
| The stuff enters the input
opening, after distributed by distribute cone, it falls down the ring
like the waterfall. It will be grinded to powder by the rollers in
turn, discharged from the discharge pipe. |
| The process assembles the Dry
Production; the difference lies in adding water and the dehydration
after grinding. This process can be designed according the user's
requirements. |
|
