|
|
 |
|
 |
The conveyers consist of standard
parts, which are advanced and simple in structure, easy to maintain.
Our vibrating equipment is adaptable for stationary and mobile crushing
plants. They are widely used in mining, metallurgical and coal industry
to transfer sandy or lump material, or packaged material. According
to different transferring equipment, the transfer system can be one
independently or multi-conveyers or combined with other transfer equipments.
The belt conveyer can be installed horizontally or aslope to meet
the needs of different transfer lines.
The belt conveyers produced by SJLC can be operated
in the circumstance temperature range from -20℃ to +40℃. The temperature
of transferred material by this belt conveyer should be lower than
50℃.
The types of the belt conveyers produced by SJLC are
as follows:
1. Devided by Driving Method:
a. STD—Mechanical Drive
It’s driven by cycloidal pinwheel reducer (with
outdoor motor ) and chain-drive mechanism.
b. STDJ Ⅱ Mechanical Drive Series .
It adopts upside-down reducer and belt-drive mechanize.
c. STD-Electric Rotor Drive Series
It’s driven by electric rotor.
2. Divided by Installation Methods
a. Fixed Series
It’s directly installed on foundation.
b. SDY-Portable Series
It’s equipped with type for moving and slope adjusting
capability, It can be Easily, it can be reely moved and adjusted by
different transfer requirements
3. Divided by Structures:
The belt conveyers produced by SJLC have three
different structures.
a. U-steel
b. Frame
c. Truss
NOTE:
There are two kinds of conveyers, one equipped
with repairing walkway while the other without. When ordering the
machine, the customers should give us clear instruction. |
 |
| Belt Width(mm) |
Belt Length (m) /Power (Kw) |
Belt Speed(m/S) |
Capacity(t/h) |
400 |
≤12/1.5 |
12∽20/2.2∽4 |
20∽25/3.5∽7.5 |
1.3∽1.6 |
40∽80 |
500 |
≤12/3 |
12∽20/4∽5.5 |
20∽30/ 5.5∽7.5 |
1.3∽1.6 |
40∽80 |
650 |
≤12/4 |
12∽20/5.5 |
20∽30/7.5∽11 |
1.3∽1.6 |
131∽323 |
800 |
≤6/4 |
6∽15/5.5 |
15∽30/7.5∽15 |
1.3∽1.6 |
278∽546 |
1000 |
≤10/5.5 |
10∽20/7.5∽11 |
20∽40/11∽12 |
1.3∽2.0 |
435∽853 |
1200 |
≤10/7.5 |
10∽20/11 |
20∽40/15∽30 |
1.3∽2.0 |
655∽1284 |
NOTE:
1. The capacity in this table is the transferred quantity calculated
under the following conditions: the density of the transferred material
is 1.0t/ m3～1.6t/ m3, the transferring angle is ≤18℃, and stacking
angle of the transferred material is 30.
2. The belt conveyer is used to transfer the material the density
of which is less than 2.5t/ m3 .
3 .The length of the belt conveyer is limitless. We can design and
manufacture it according to customers' special requests . |
|
