|
|
Rotary Tube Drying Machine
is widely used in building materials, metallurgy, chemical industry
and cement industry to dry the stuff such as limestone, coal powder,
slag and clay. It mainly consists of revolution body,
raising stuff plate, driving device, supporting device and seal ring.
It has the advantages of reasonable structure,
fine manufacture, high capacity, low consumption and convenient operation.
Compared with other companies, we guarantee the quality, pay attention
to the reputation, supervise installation and try-run the machine
free and assist dealing with the carriage for the buyer. |
 |
Model |
Diameter of Rotating Tube(mm) |
length of RotatingTube
(m) |
Slope
(a°) |
Rotary Speed
(r/m) |
Weight
(T) |
Power(Kw) |
Capacity(M3) |
| 0.6×8 |
600 |
8 |
3-5 |
8 |
5.1 |
4 |
2.26 |
| 0.8×10 |
800 |
10 |
3-5 |
7.2 |
6.9 |
4 |
5.02 |
| 1.0×10 |
1000 |
10 |
3-5 |
6.73 |
7.5 |
5.5 |
7.85 |
| 1.2×12 |
1200 |
12 |
3-5 |
5.8 |
13.1 |
11 |
13.31 |
| 1.5×12 |
1500 |
12 |
3-5 |
4.8 |
22.3 |
15 |
21.2 |
| 2.2×14 |
2200 |
14 |
3-5 |
3.2 |
52.8 |
30 |
53.22 |
| 2.4×18 |
2400 |
18 |
3-5 |
3 |
73.3 |
37 |
81.43 |
| 2.4×24 |
2800 |
24 |
3-5 |
2.59 |
97 |
75 |
147.8 |
|
| The concentrating machine is
suitable for expelling water in mine. It can increase the magma from
20%-30% to 40%-70%. It is widely used in metallurgic industry, chemical
industry, coal, nonmetallic separating mine, conservation, and etc
. |
The stuff of different weights
falls at different speeds in the fluid.
The indented cylinder is used for re-separation
of different shapes and densities broken mine powder and other impurities.
It can eliminate the dust in the mine powder. It has become obverous
that clarification is required regarding the use of the spiral cleaner.
Any previous memos relating to this issue are to be disregarded.
In accordance with the Official Grain Grading
Guide, the spiral separator is only to be used for grading improvement
for samples of domestic mine. |
Model |
Rotating speed
(r/min) |
Capacity (t/h) |
Slop of Flume
() |
Power (Kw) |
Weight (Kg) |
| Sand return |
Over flou |
300 |
8.3-22 |
30-80 |
10-30 |
12 |
y1.1-6 |
1.0 |
500 |
8-15.5 |
140.260 |
32 |
14-18 |
y1.1-6 |
1.6 |
750 |
4.5-10 |
250-570 |
65-154 |
14-18 |
y3-6 |
2.7 |
1000 |
1.6-7.4 |
216-570 |
50-260 |
14-18 |
y5.5-6 |
4.1 |
1200 |
5-7 |
1170-1600 |
155 |
12 |
y7.5-6 |
7.5 |
1500 |
2.5-6 |
1340-2740 |
235 |
16 |
y7.5-6 |
10.5 |
|
|
